BSSJP - RTV 88
- MSDS: BSSJP
- Manufacturer: GE SILICONES
- Product Name: RTV 88
- National Stock Number: 8030-00-767-4040
Product Identification
Product ID:RTV 88
MSDS Date:02/12/1993
FSC:8030
NIIN:00-767-4040
Kit Part:Y
MSDS Number: BSSJP
Responsible Party
WATERFORD, NY 12188
US
Emergency Phone: 518-237-3330
Info Phone: 518-237-3330
Preparer: DA POLSINELLI
Cage: GESIL
Contractor
Telephone: 203-531-5500
Cage: 33530
Ingredients
ETHYL SILICATE 40
CAS: 110990-60-2
Fraction By Weight: 1-5%
OSHA PEL 100 PPM
ACGIH TLV: 10 PPM
20 G/L
RTECS: 9999999VO
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY BE HARMFUL IF
SWALLOWED. SKIN CONTACT: PLANT EXPERIENCE HAS SHOWN THAT SKIN
HAZARD IS NOT APPLICABLE IN FORM. INHALATION: MAY CAUSE MILD
RESPIRATORY IRRITATION. EYE CONTACT: MAY IRRITAT E EYES.
TARGET ORGANS: RESPIRATORY AILMENTS, LIVER & KIDNEY DAMAGE.
Explanation of Carcinogenicity:THIS PRODUCT OR ONE OF ITS INGREDIENTS
PRESENT 0.1% OR MORE IS NOT LISTED AS A CARCINOGEN OR SUSPECTED
CARCINOGEN.
Effects of Overexposure:THIS PRODUCT CONTAINS METHYLPOLYSILOXANES WHICH
CAN GENERATE FORMALDEHYDE AT APPROXIMATLEY 300 F AND ABOVE, IN
ATMOSPHERES WHICH CONTAIN OXYGEN. FORMALDEHYDE IS A SKIN &
RESPIRATORY SENSITIZER, EYE AN D THROAT IRRIANT, ACUTE TOXICANT,
AND POTENTIAL CANCER HAZARD. AN MSDS FOR FORMALDEHYDE IS AVAILABLE
FROM GE SILICONES.
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:INGESTION: DO NOT INDUCE VOMITING. SLOWLY DILUTE WITH 1-2
GLASSES OF WATER OR MILD AND SEEK MEDICAL ATTENTION. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. SKIN: WASH WITH SOAP
AND WATER. IN HALATION: MOVE PERSON TO FRESH AIR. EYES: IN CASE OF
CONTACT, IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST
15 MINUTES AND GET MEDICAL ATTENTION IF IRRITATION PERSISTS.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:NONE KNOWN
Accidental Release
Spill Release Procedures:WIPE, SCRAPE OR SOAP UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT AS SPECIFIE D IN THE PROTECTIVE EQUIPMENT
SECTION.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH SKIN AND EYES. USE
ONLY IN A WELL VENTILATED AREA. CAUTION.
Exposure Controls
Respiratory Protection:USE IN WELL VENTILATED AREA.
Ventilation:USE IN A WELL VENTILATED AREA.
Protective Gloves:CLOTH GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE KNOWN
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NEG
Vapor Density:NEG
Spec Gravity:1.50 (WATER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:RED SOLID; ODORLESS
Percent Volatiles by Volume:<2
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, FORMALDEHYDE
Disposal
Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.